Rake-O-Vac® Sweeper/Vacuum
Bunker Rakes
Model: 07055
Leaves, clippings, litter, pine needles don’t stand a chance with Rake-O-Vac®. The Toro® Rake-O-Vac® provides the only combination of precision pickup and powerful vacuum in one sweeper. A premier performer for premier results in wet or dry conditions.
Specifications
| Drivetrain | Gas |
| Dump System | Full width self-cleaning, semi-automatic dumping. |
| Fan Design | Hood: twin construction for uniform air distribution; 4.5″ (11.4 cm) deep x 63″ (160 cm) wide. Inlet area: 283 sq. in. (1826 sq. cm). Variable position, front weighted rubber flap. High tensile, .5625″ (4 cm) stressproof steel shaft mounted in self-align, Hood: twin construction for uniform air distribution; 4.5″ (11.4 cm) deep x 63″ (160 cm) wide. Inlet area: 283 sq. in. (1826 sq. cm). Variable position, front weighted rubber flap. High tensile, .5625″ (4 cm) stressproof steel shaft mounted in self-aligning sealed ball bearings. Blower discharge area: 255 sq. in. (1645 sq. cm). |
| Height | 79.5″ (202 cm) |
| Hitch | Pin type, .75″ (1.9 cm) diameter; adjustable vertical height for tractor hitches from 7.25″ (18.4 cm) to 17.25″ (43.8 cm) height. |
| Hopper Design/Capacity | 4.75 cu. yd. (3.63 m3) volume; 18-gauge top section with 16-gauge bottom section – rib reinforced. |
| Impeller Drive | Impeller: centrifugal type housing, double inlet. Four alloy steel blades, 16″ (41 cm) wide x 23.25″ (59 cm) diameter, .1875″ (4.8 mm) thick. High tensile, .5625″ (4 cm) stressproof steel shaft mounted in self-aligning sealed ball bearings. Banded double., Impeller: centrifugal type housing, double inlet. Four alloy steel blades, 16″ (41 cm) wide x 23.25″ (59 cm) diameter, .1875″ (4.8 mm) thick. High tensile, .5625″ (4 cm) stressproof steel shaft mounted in self-aligning sealed ball bearings. Banded double. B-80 drive belt direct from drive shaft to fan impeller drive shaft. Fan impeller runs at 1580 rpm [tip speed 9,720 ft/min. (2963 m/min.)] at 3250 engine rpm. |
| Length | 13’3″ (4.0 m) |
| Main Frame/Chassis | All welded, structural, rectangular, 2″ x 4″ (5 cm x 10 cm) and 4″ x 4″ (10 cm x 10 cm), 11-gauge, steel tubing. |
| Operating Width (Working Width) | 85.5″ (217 cm) |
| Optional Accessories | Optional forward sweeping continuous brush with polypropylene bristles, floating action provided by spring counterbalance and gauge wheel height adjustment (275 rpm [tip speed 1,370 ft./min. (417 m/min.)] at 3250 engine rpm). Model 07162. |
| Power Train (Engine Description) | Kohler® Command Pro® CH682, 23 hp (17.15 kW) @ 3600 rpm, 4 cycle, air-cooled, V-twin cylinders, horizontal crankshaft with a 5.5″ (14 cm) dry centrifugal clutch. Compression ratio: 8.5:1. Overhead placement valves; intake, forged high carbon steel, exhaus, Kohler® Command Pro® CH682, 23 hp (17.15 kW) @ 3600 rpm, 4 cycle, air-cooled, V-twin cylinders, horizontal crankshaft with a 5.5″ (14 cm) dry centrifugal clutch. Compression ratio: 8.5:1. Overhead placement valves; intake, forged high carbon steel, exhaust Stellite® faced. Hydraulic valve lifters. Full pressure 4 pint (2.3 liter) with filter, oil capacity. 12-volt, 15 amp alternator with solid state regulator/rectifier. Solid state electronic ignition system with electronically controlled spark advance. Tri-phase design with screen pre-cleaner, replaceable filter cartridge and dump valve. |
| Tires | High flotation type I-1 rib tread, 11L-14SL, 6 ply rating, tubeless construction mounted on 8″ (20 cm) x 14″ (36 cm) wheel with six bolt attachment. Inflation pressure 28 psi (1.9 bar). |
| Weight | 2,980 lbs. (1,355 kg) |
| Width | 85.5″ (217 cm) |
Check Out Toro Equipment
