Greensmaster® 3250-D
Greens Mower
Model: 04384
The Greensmaster 3250-D is distinguished for its field-proven performance and exceptional quality of cut. Equipped with patented DPA cutting units for a superior cut and minimal maintenance, convenient controls for easy operation, and ample power to handle any application–it’s no wonder this classic model has been trusted over the years to deliver the performance golf courses demand with a putting surface that exceeds expectations.
Specifications
| Engine Cooling | Liquid Cooled |
| Fuel / Power Source | Diesel |
| Fuel Capacity | 6 U.S. gal. (22.7 L) |
| Gauges/Instrumentation | Hour meter and warning light cluster. |
| Grass Distribution | Non-adjustable front shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. |
| Ground Pressure | 8 – 12 psi (.55 – .83 bar) average at recommended minimum tire pressures, with a 200 lb. operator and cutting units down. |
| Ground Speed – Forward | 0 – 10 mph (0 – 16.1 km/h) |
| Height | 77.5″ (197 cm) |
| Mowing Speed | 2 – 5 mph (3.2 – 8 km/h) |
| Number of Blades | 11, 14, 8 |
| Reel Diameter | 5” (12.7cm) |
| Height of Cut Range | Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062″ – 0.297″ (1.6 – 7.5 mm). With high HOC kit, range is 0.297″ – 1.0″ (7.5 – 25.4 mm). Effective HOC may vary depending on turf co, Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062″ – 0.297″ (1.6 – 7.5 mm). With high HOC kit, range is 0.297″ – 1.0″ (7.5 – 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed., Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062″ – 0.297″ (1.6 – 7.5 mm). With high HOC kit, range is 0.297″ – 1.0″ (7.5 – 25.4 mm). Effective HOC may vary depending on turf conditions and roller/bedknife installed. |
| Mowing Speed | 2 – 5 mph (3.2 – 8 km/h) |
| Number of Blades | 11, 14, 8 |
| Overall Width | 68″ (173 cm) |
| Parking/Service Brakes | Foot activated 6″ (15.2 cm) drum type mechanical with rack and pawl lock for parking. |
| Power Steering | Yes |
| Power Train (Engine Description) | Kubota® 902 tier 4i, 3-cylinder liquid-cooled diesel engine. 55.0 cu. in. (902 cc). Full pressure lubrication, oil filter. 24.8 hp (18.5 kW) @ 3600 rpm. Engine governed to 2760 rpm high idle, 1500 rpm low idle (no load). |
| Product Length | 93.9″ (238 cm) with baskets |
| Reel Diameter | 5” (12.7cm) |
| Reel/Cylinder Drive | Hydraulic |
| Safety/Operator Safety | Roll Over Protection System standard. Sound level of 84 dBA at operator ear under normal conditions. |
| Starting | Key Start |
| Steering System Description | No-tool quick adjust steering arm position, with arm motion allowing a wide range of operator sizes. Steering cylinder has through shaft design for precise straight line tracking. |
| Tires – Front | 19″ x 10.5″ – 8″, 4-ply, Smooth Tread |
| Tires – Rear | 19″ x 10.5″ – 8″, 4-ply, Smooth Tread |
Check Out Toro Equipment
